Tarjeta Flexi Bender Kit - estilo Funko Pop para imprimir en 3D

Tarjeta Flexi Bender Kit - estilo Funko Pop es una referencia para solicitar fabricación bajo pedido.

Flexi Bender Kit CardA fun game or a cute ornament for your house. A model that is easy to assemble, but requires some preparation. To obtain perfect joints you need to have a good calibration of the printer, if the pieces do not fit together correctly, I advise you to act on the K value of your filament, modifying it to obtain a perfect fit.

Not all filaments are the same, so a little patience will be needed to obtain the desired rigidity of the joints.In the 3mf file you will find the interlocking test. print it and try to fit the two pieces together, if you have to use too much force then you need to calibrate your filament. There are two versions: Tight and Tolerance, If you had problems with the tight version, try the tolerance and maybe they fit better. In the Print profile you will find a single-color and a multi-color version.

All versions are available with tight or increased tolerance In the Raw file you can find the single pieces without the Kit card, so if you break something, you don't have to reprint everything. IMPORTANT NOTICE:The model does not require supports from the slicer.

But on the head I have prepared a support that will be created automatically and will be removed with pliers. the slicer will warn you that there are suspended areas, absolutely do not activate the supports and do not listen to this warningEDIT 4 March 2024:Added a version with tolerance for those who have interlocking problemsHead support modified and implemented for better results.Added two plates with all the spare parts

Revisamos el archivo, la cantidad, el material, el acabado y el envío antes de autorizar la producción. La imagen y la información técnica corresponden a la referencia de origen y no representan un pedido fabricado por Fábrica 3D.